Jl-audio Stealthbox SB-F-ZX3/10W3 User Manual download pdf

➔

Stealthbox

INSTALLATION GUIDE

SB-F-ZX3/10W3, JL AUDIO, Inc 2002

Sheet SKU#011157 Revision 06/18/02Page 1

(2000-Up ZX3 2-door & 2001-Up ZX5

4-door hatchback)

SB-F-ZX3/10W3

for the

This Stealthbox is a product that

requires professional installation skills

and tools.

Please read this installation guide

thoroughly before beginning the

project. It will guide you step by step

through the installation. Several of

the steps in this process may require

two people to accomplish.

It is absolutely vital that the

enclosure be properly mounted to

the vehicle according to these

instructions. Failure to mount the

enclosure properly presents two

problems: 1) The sub-bass

performance will suffer due to the

movement of the enclosure caused

by the force exerted by the

woofer(s) and 2) A loose enclosure

presents a serious safety hazard in

the event of a collision or sudden

deceleration.

Please enjoy your JL Audio

Stealthbox responsibly.

STEP 1:

Remove the four Phillips head

screws, panel button and cargo light from

driver’s side rear cargo area.

STEP 2:

Remove the plastic safety belt

retractor cover. Look up under the plastic

cover for a Phillips head screw. Remove this

screw. (The location of this screw is shown in

the picture by the upward arrow).

STEP 3:

Remove the two plastic Phillips head

screws indicated by the arrows.These are

located in the driver’s rear hatch plastic trim

panel. Remove the carpeted side panel.This

panel will be cut in Step 9 so as to form a

trim for the Stealthbox.The view shown

above is from the back seat looking toward

the hatch. Also remove the hatch flooring (this

flooring will be re-installed later).

STEP 4:

Locate the MOLEX

plug and pull it

loose from the side panel.

STEP 5:

Remove the T-27 TORX head bolt

from the back side of the driver’s side rear

wheel well. Remove the Phillips screw from

directly below the TORX head bolt.

STEP 6:

Loosen the driver’s side rear fabric

wheel well by pulling it toward the front of

the car.

START

HERE

Continued on Page 2 ➔

www.jlaudio.com

➔

1 2 3

Summary of Contents

Page 1 - Stealthbox

➔➔➔➔➔Stealthbox®INSTALLATION GUIDESB-F-ZX3/10W3, JL AUDIO, Inc 2002Sheet SKU#011157 Revision 06/18/02Page 1(2000-Up ZX3 2-door & 2001-Up ZX54-doo

Page 2 - Continued on Page 3 ➔

➔➔STEP 7:Pull plastic mounting stud out fromthe rear side metal panel were the MOLEX®wiring plug was removed in Step 4.Cont.FromPage 1Continued on Pag

Page 3 - JL AUDIO 250/1

Specifications:Enclosure Type: Acoustic Suspension (Sealed)Driver Type: One JL AUDIO 10W3-D2 SubwooferNominal Impedance: 4ΩCont. Power Handling: 250 W

Comments to this Manuals

No comments

Jl-audio Stealthbox SB-F-ZX3/10W3 User Manual

Browse online or download User Manual for Car speakers Jl-audio Stealthbox SB-F-ZX3/10W3. JL Audio Stealthbox SB-F-ZX3/10W3 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Car speakers Jl-audio Stealthbox SB-F-ZX3/10W3