Jl-audio Stealthbox SB-T-TUNCNSL2/10W3v3/BK User Manual

Browse online or download User Manual for Car speakers Jl-audio Stealthbox SB-T-TUNCNSL2/10W3v3/BK. JL Audio Stealthbox SB-T-TUNCNSL2/10W3v3/BK User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Stealthbox
®
INSTALLATION GUIDE
SB-T-TUNCNSL2/10W3v2, JL AUDIO, Inc 2005
Sheet SKU#011180 Revision 4/6/2005Page 1
for the
SB-T-TUNCNSL2/10W3v2
(‘03-Up Toyota Tundra Access & Double Cab
with front bucket seats and center console)
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation.Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
STEP 1:
Using a 14mm socket,remove the
four bolts that secure the passenger side front
seat.
STEP 2:
Tilt the seat to the rear, unplug the
exposed wire assembly,remove the seat from
the truck.
STEP 3:
Remove the front storage access
door. Using a 10mm socket,remove the
exposed bolts.
STEP 4:
With the main storage door open,
grab ahold of the black cup holder section
and pull up.
STEP 5:
Using a 10mm socket,remove the
exposed bolts. Also remove the bolts that are
located at the bottom of the main storage
bucket.
STEP 6:
Remove the plastic buttons that are
located on each side of the center console.
START
HERE
Continued on Next Page
www.jlaudio.com
Page view 0
1 2 3 4 5

Summary of Contents

Page 1 - Stealthbox

➔➔➔➔Stealthbox®INSTALLATION GUIDESB-T-TUNCNSL2/10W3v2, JL AUDIO, Inc 2005Sheet SKU#011180 Revision 4/6/2005Page 1for theSB-T-TUNCNSL2/10W3v2(‘03-Up

Page 2 - Continued on Next Page ➔

➔➔➔➔➔STEP 7: Slide the center console to the rear oftruck.This will allow exposer of the 12v plug wires.Unplug and then remove the center console from

Page 3

➔➔➔Cont.FromPreviousPageContinued on Next Page ➔➔STEP 14: Thread in the three supplied socket cupset screws into the Stealthbox.Make sure that thesock

Page 4

➔➔➔➔STEP 23: Apply a supplied flat washer, lock wash-er and nut onto the three socket sup set screw.Tightly secure all three nuts..Cont.FromPreviousPa

Page 5 - VR650-CXi

Specifications:Enclosure Type: SealedDriver Type: 10W3v2-D2Nominal Impedance: 4ΩCont. Power Handling: 300WattsJLAudio recommends using a high quality

Comments to this Manuals

No comments