JL Audio XD200/2 User Manual Page 1

Thank you for purchasing a JL Audio amplifier for your automotive sound system. Your amplifier has been designed and manufactured to exacting standar

10 | JL Audio - XD200/2 Owner’s Manual SPEAKER OUTPUTSThe XD200/2’s speaker outputs are designed to accept 16 AWG - 8 AWG wire. To connect the spea

11STATUS LED / PROTECTION CIRCUITRYThere is a single multi-color LED on the top surface of the amplifier to indicate the amplifier’s operating status.

12 | JL Audio - XD200/2 Owner’s Manual APPENDIX A:Input Sensitivity Level SettingFollowing the directions below will allow the installer to adjust

13APPENDIX C:XD200/2 SpecificationsGeneral Specifications:Recommended Fuse Value: 20ARecommended Fuse Type: MAXI® or AGUInput Sections:No. of Inputs:

14 | JL Audio - XD200/2 Owner’s Manual “How do I properly set the input sensitivity on my amplifier?” Please refer to Appendix A (page 12) to set

15“My amplifier shuts off once in a while, usually at higher volumes.” Check your voltage source and grounding point. The power supply of the XD200/

16 | JL Audio - XD200/2 Owner’s Manual INSTALLATION NOTES:Use this diagram to document your amplifier’s switch and control positions.

17

18 | JL Audio - XD200/2 Owner’s Manual NOTES:

19NOTES:

2 | JL Audio - XD200/2 Owner’s Manual PROTECT YOUR HEARING! We value you as a long-term customer. For that reason, we urge you to practice restrain

LIMITED WARRANTY  AMPLIFIERS USAJL AUDIO warrants this product to be free of defects in materials and workmanship for a period of two (2) years. T

3PLANNING YOUR INSTALLATIONIt is important that you take the time to read this manual and that you plan out your installation carefully. The followin

4 | JL Audio - XD200/2 Owner’s Manual PRODUCT DESCRIPTIONThe JL Audio XD200/2 is a two-channel, full-range audio amplifier utilizing JL Audio NexD

5POWER CONNECTIONSBefore installing the amplifier, disconnect the negative (ground) wire from the vehicle’s battery. This will prevent accidental dama

6 | JL Audio - XD200/2 Owner’s Manual TURNON LEADThe XD200/2 uses a conventional +12V remote turn-on lead, typically controlled by the source unit

7INPUT SENSITIVITY CONTROLThe control labeled “Input Sens.” can be used to match the source unit’s output voltage to the input stage of the amplifier

8 | JL Audio - XD200/2 Owner’s Manual FILTER CONTROLSMost speakers are not designed to reproduce the full range of frequencies audible by the human

9REMOTE LEVEL CONTROL OPTIONALWith the addition of the optional Remote Level Control (HD-RLC), you can control the volume of the XD200/2 from the fr